Hi-Mod Splice Links

Hi-Mod terminals are an alternative to swage terminals designed for easy installation on site with basic hand tools. The unique crown ring arranges the wire strands for even spacing around the fitting eliminating the need to bend wires around the cone which ensures the cone is in the proper location. Hi-Mods do not require the use of sealant in the fittings. You can, however, fill them with a non-acidic polysulfide or better marine-grade sealant.

• Used to splice two links of wire together.
• Unique crown ring arranges wire strands for even spacing around the fitting.
• Crown ring keeps the strands from dropping into the cone slots.
• Cone and crown ring are fully re-usable allowing for easy inspection and re-use.

If you are replacing existing swage terminals insure that the dimensions match what you are replacing.