|
|
|
|
50 mm Protexit™ Exit Block |
|
|
|
|
Description: |
50 mm Protexit™ Exit Block |
Item No.: |
H1203 |
Manufacturer: |
Harken |
Mfg's Number: |
1203 |
|
|
|
MSRP: |
$155.80 |
|
|
Specifications: |
Sheave Dia. |
1 15/16 in |
117 mm |
Length. |
4 5/8 in |
117 mm |
Weight |
4.5 oz |
128 g |
Maximum Line Dia. |
1/2 in |
12 mm |
Maximum Working Load |
1760 lbs |
800 kg |
Breaking Load |
3528 lbs |
1600 kg |
|
Product Description |
|
When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. |
|
|
|
|
|