Link Plate Adapter - Type 304SS Supplied as a double plate without clevis pins. This assembly
is to be used as a pair and not to be used as a single plate.
Pin
Size
Pin
to Pin
Part
Number
5/16"
1-5/16"
LPA10
3/8"
1-1/8"
LPA12
1/2"
1-5/16"
LPA16
5/8"
1-5/8"
LPA20
3/4"
2"
LPA24
3/8" - 1/2"
1-5/16"
LPA1216
1/2" - 5/8"
1-5/8"
LPA1620
Delta
Plates - Type 304SS
Commonly used in split backstays to join the upper piece with
the two lower legs. Double plate will take eye type terminals.
Double plate are designed to be used in pairs and not split
up for use as single plates.
Double with pins except as noted.
(*) Single Plate.
(**) Double Plate Less Pins.
(***) Step Down Pin Size.
Top
Pin
Base
Pin
Part
Number
1/4"
1/4"
DP0808-J*
5/16"
5/16"
DP1010-J**
3/8"
3/8"
DP1212-J**
1/4"
1/4"
DP0808-S
5/16"
5/16"
DP1010-S
3/8"
5/16"
DP1210-S***
3/8"
3/8"
DP1212-S
1/2"
3/8"
DP1612-S***
1/2"
1/2"
DP1616-S
5/8"
1/2"
DP2016-S***
5/8"
5/8"
DP2020-S
Link
Plate Extenders - Type 304SS
Supplied as double plates with clevis pins. These pairs are
not designed to be split up for use as singles. Commonly used
to extend short rigging or to raise furling system drum at the
stemhead.
