Standing Rigging Rigging Hardware Pins
 

Cotter Pins
Type 316 SS cotter pins. Buy an assortment, as many clevis pins of the same diameter have different size holes for cotter pins. Bronze available by special order.

Diameter Grip Part Number
1/16" 3/4" COTP0224
3/32" 3/4" COTP0324
3/32" 1" COTP0332
3/32" 1-1/2" COTP0348
1/8" 1" COTP0432
5/32" 1-1/4" COTP0540
3/16" 1-1/4" COTP0648
1/4" 2" COTP0864
Clevis Pins
Part numbers with (*) are correct length for correspondign aircraft fork pin hole. Part numbers with (**) are correct length for clevis pin to fit our turnbuckle toggles that start with part number "T".
Grip length is measured from inside of head to inside cotter pin hole. Part numbers are dimensions in 32nds of an inch.
Diameter Grip Part
Number
3/16" 9/13" CP0609*
3/16" 13/32" CP0613*
1/4" 7/16" CP0814*
1/4" 1/2" CP0816**
1/4" 5/8" CP0820
1/4" 13/16" CP0826
5/16" 9/16" CP1018*
5/16" 5/8" CP1020**
5/16" 21/32" CP1021*
5/16" 11/16" CP1022
5/16" 1" CP1032
3/8" 11/16" CP1222**
3/8" 23/32" CP1223*
3/8" 13/16" CP1226
3/8" 1-1/4" CP1240
7/16" 3/4" CP1424*
7/16" 25/32" CP1425*
7/16" 7/8" CP1428**
1/2" 27/32" CP1627*
1/2" 15/16" CP1630**
1/2" 1-1/8" CP1636
1/2" 1-9/16" CP1650
9/16" 27/32" CP1827*
9/16" 1" CP1832
5/8" 1-1/16" CP2034
5/8" 1-1/8" CP2036**
5/8" 1-5/16" CP2042
5/8" 1-3/4" CP2056
5/8" 2-1/8" CP2068
3/4" 1-1/4" CP2440**
3/4" 1-9/16" CP2450
3/4" 2-1/8" CP2468
7/8" 1-11/16" CP2854**
7/8" 2-13/16" CP28100
1" 1-11/16" CP3254**
Rigging Pins
Rigging pins with a cotter pin in each end are used where a longer pin is needed. Grip is measured from inside of the cotter pin holes.
Supplied with cotter pins.
Diameter Grip Part
Number
1/4" 1-1/2" RP0848
1/4" 2" RP0864
1/4" 2-1/2" RP0880
5/16" 2" RP1064
5/16" 3-1/2" RP10112
3/8" 1-3/4" RP1256
3/8" 2" RP1264
3/8" 2-5/8" RP1284
3/8" 3-1/2" RP12112
7/16" 1" RP1432
7/16" 1-1/4" RP1440
7/16" 1-1/2" RP1448
7/16" 2" RP1464
1/2" 2" RP1664
1/2" 2-1/4" RP1672
1/2" 2-1/2" RP1680
1/2" 3" RP1696
1/2" 3-1/2" RP16112
1/2" 6-1/2" RP16208
5/8" 2" RP2064
5/8" 2-1/2" RP2080
5/8" 3-1/2" RP20112
5/8" 6-1/2" RP20206
Cotter Rings
Cotter rings in our opinion should not be used in standing rigging applications. These are more common on lifeline pins and turnbuckles where they can be checked more often for secure engagement.
ID
Ring 		For
Clevis Pin		 Part
Number
3/8" 3/16" COTR12
5/8" 3/16-1/4" COTR20
5/8" 3/16-1/4" COTR20PT*
3/4" 1/4-3/8" COTR24
7/8" 5/16-3/8" COTR28
1-3/16" 1/2-5/8" COTR38
The numbers in Cotter, Clevis, and Rigging Pin Part Numbers represent dimensions in 32nds of an inch. The first two numbers indicate diameter and the remaining numbers indicate the grip or useable length of the pin.
 
Toggles | Plates | Thimbles | Sleeves & Clips | Pins
Rigging Wire | Swage Terminals | Swageless Terminals | Turnbuckles | Rigging Hardware
 

Home | About Us | Products | Services | Contact Us
80 NW 73 Street, Miami, FL 33150   Phone: 305-758-1074   800-458-1074   Fax: 305.754.0257   800-443-0422