SINGLE
GATE EYE - SWIVEL Type 316SS.
One piece assembly that will not reeve through stanchions.
It is used with pelican hook to close gates.
Part
Number
Wire
LSES04
1/8"
LSES06
3/16"
LSES08
1/4"
INTERLOCKING
GATE EYE - SWIVEL Type 316SS.
These are one piece. Insure that opposite end of lifeline
will reeve through stanchions if necessary.
Part
Number
Wire
LDES04
1/8"
LDES06
3/16"
LDES08
1/4"
SINGLE
GATE EYE THREADED NON-SWIVEL Type 316SS.
Two piece assembly that will reeve through stanchions. Left
hand thread on stud. Use thread locking agent on threads after
assembly to insure secure attachment of stud to gate eye. See
main catalog index for thread locking agent.
Part
Number
Wire
LSE04
1/8"
LSE06
3/16"
LSE08
1/4"
INTERLOCKING
GATE EYE - THREADED NON-SWIVEL Type 316SS.
These interlocking eyes have removable studs with left hand
threads that will reeve through stanchions. Use thread locking
agent on threads after assembly to insure secure attachment
of stud to eye.
Part
Number
Wire
LDE04
1/8"
LDE06
3/16"
LDE08
1/4"
REPLACEMENT
STUD FOR THREADED GATE EYE Type 316SS.
Studs have left hand UNF threads to fit above gate eyes. Use
thread locking agent to insure secure attachment to eyes when
installing on vessel.
Part
Number
Wire
Size
Thread
Diameter
Thread
Length
LST040814L
1/8"
1/4"
7/16"
LST061014L
3/16"
5/16"
7/16"
LST081214L
1/4"
3/8"
7/16"
GATE
STOP Type 316SS.
An adjustable stop used in place of interlocking eye nuts at
the hinge part of a lifeline gate to keep tension in the lifeline
run next to the gate. It sets locks down to wire.
Part
Number
Maximum
Coating
LGS08
5/16"
LGS10
3/8"
CONVERSION
SLEEVES Stainless Steel. To
fit 1/8" wire to 3/16" swage terminals. For lifeline
use only.
Gate Eyes 
