Lightweight, low friction, corrosion resistant pulleys and hardware for sportfishing outriggers and dredges.
Here is an example of an outrigger set up using Harken equipment. Your design may vary based on boat size, where you fish, and other specific needs.
Single 16 mm pulleys are used on outrigger eye bolts to create less resistance when pulling down halyard lines. Double and triple 16, 22 and 29 mm pulleys are used as clusters at the gunnel for outrigger halyard rigging.
18 mm Fly pulleys are light, strong and improve fair lead to avoid side loading.
40, 57 and 75 mm pulleys are used to run a dredge line from the outrigger, 2 can be used to rig an A-frame style setup.
The 40 mm fiddle pulley is used in place of a glass or stainless ring to guide teaser line through the halyard line.